Edmonton, St. Albert, Sherwood Park & Area
Furnace Repair Across Edmonton and Area
7 regions and 28 communities, from downtown towers to new subdivisions in Leduc and Spruce Grove. Each community page covers the housing era, the heating equipment you are likely to have and the problems we see most there.
- 7 regions, 28 communities with their own page
- Typical drive time 20–30 minutes by region
- No-heat calls get priority across every area
- 7 Service Regions
- 28 Communities With a Local Page
- 20–30 Typical Drive, Minutes
Drive times are typical estimates by region, not a promise. We confirm the arrival window when we reply to your request.
7 Regions
Where We Repair Furnaces
Towers and century-old houses in the centre, 1950s bungalows and 1970s suburbs around them, and new subdivisions out past the Henday and in the cities next door. Each one changes what the furnace problem usually is.
- ~20 min typical drive
Central Edmonton
Towers, character homes and the oldest heating systems in the city
Central Edmonton overview - ~25 min typical drive
West Edmonton
Character homes by the river valley, 1950s bungalows and 1970s suburbs out to the Henday
West Edmonton overview - ~25 min typical drive
Southwest Edmonton
River valley homes from the 1970s and the fastest-growing subdivisions in the city
Southwest Edmonton overview - ~25 min typical drive
Southeast Edmonton
1950s bungalows by Mill Creek, the Mill Woods suburbs and new neighbourhoods to the south
Southeast Edmonton overview - ~25 min typical drive
North Edmonton
A former town by the river, two 1970s suburbs and a new neighbourhood on an old base
North Edmonton overview - ~30 min typical drive
St. Albert, Spruce Grove & Stony Plain
Furnace repair and heat pump work north-west and west of the city, each town with its own permits
St. Albert, Spruce Grove & Stony Plain overview - ~30 min typical drive
Sherwood Park, Leduc & Beaumont
East and south of the city: Strathcona County, the river city by the Heartland, and two fast-growing cities by the airport
Sherwood Park, Leduc & Beaumont overview
Full Directory
All 28 Communities by Region
Each community page covers the housing era, the furnace and venting setup you likely have, and the problems we see most there.
~20 min typical drive · 4 communities
Central Edmonton
Downtown, Oliver, Garneau and Old Strathcona. High-rise condos with building-wide systems and in-suite fan coils next to 1900s to 1940s character homes that started life on coal or gravity heat, with undersized ductwork, shared chimneys and tight basements.
- Downtown Edmonton T5J In-suite fan coils blowing cool air because the building heating loop is off, unbalanced or valved shut at the unit
- Oliver T5K Fan coils and in-suite heat pumps in condo towers, with building rules on access and work hours
- Garneau T6G Furnaces in rental houses and conversions that were patched rather than maintained
- Old Strathcona T6E Character homes with ductwork added after coal or gravity heat, often undersized
~25 min typical drive · 4 communities
West Edmonton
Westmount, Glenora, Jasper Place and Callingwood. Three eras in one drive west: 1910s to 1950s homes near 124 Street and the river valley, 1950s bungalows and skinny-home infill along Stony Plain Road, and 1970s to 80s suburbs near West Edmonton Mall and Anthony Henday Drive.
- Westmount T5M 1910s to 1940s houses with ductwork added after coal or gravity heat
- Glenora T5N Larger older homes with long duct runs that leave far rooms and upper floors cool
- Jasper Place T5P 1950s bungalows on their second furnace, with the orphaned water heater question on the next replacement
- Callingwood T5T Second- and third-generation furnaces with worn inducer motors, igniters and blower capacitors
~25 min typical drive · 4 communities
Southwest Edmonton
Riverbend, Terwillegar, Windermere and Heritage Valley. 1970s to 90s homes along the river valley and Terwillegar Drive, then 1990s to 2020s subdivisions out past the Henday with high-efficiency furnaces, side-wall PVC venting, HRVs and bonus rooms over the garage.
- Riverbend T6R Furnaces on their second or third generation, some still chimney-vented and some already on PVC
- Terwillegar T6R Builder-grade furnaces from the first phases reaching 15 to 20 years
- Windermere T6W Side-wall PVC vents frosting or drifting over and tripping the pressure switch
- Heritage Valley T6W Builder-grade high-efficiency furnaces in the earliest neighbourhoods approaching 15 years
~25 min typical drive · 4 communities
Southeast Edmonton
Bonnie Doon, Mill Woods, Summerside and Ellerslie. 1950s homes east of Mill Creek Ravine, the large planned suburb of Mill Woods built from the 1970s on, and 1999 to 2010s neighbourhoods along Ellerslie Road and around Summerside's lake.
- Bonnie Doon T6C Second-generation furnaces aging out in 1950s homes
- Mill Woods T6K Second- and third-generation furnaces on original 1970s and 80s ductwork
- Summerside T6X Original builder-grade furnaces from the first phases reaching 15 to 20 years
- Ellerslie T6X Frozen condensate lines where they run to a drain in an unheated space
~25 min typical drive · 4 communities
North Edmonton
Griesbach, Castle Downs, Beverly and Clareview. 1950s bungalows in Beverly near the North Saskatchewan River, 1970s to 80s suburbs in Castle Downs and Clareview, and Griesbach, built from the 2000s on the former CFB Griesbach site.
- Griesbach T5E PVC intake and exhaust terminations drifted over or frosted shut
- Castle Downs T5X Chimney-vented furnaces at the end of their life, with a venting conversion on replacement
- Beverly T5W Replacement furnaces in 1950s bungalows that are now aging out
- Clareview T5A Blower capacitors and PSC blower motors wearing out on older furnaces
~30 min typical drive · 4 communities
St. Albert, Spruce Grove & Stony Plain
St. Albert, Morinville, Spruce Grove and Stony Plain. The city on the Sturgeon River with 1960s to 2020s neighbourhoods, the town north of it on Highway 2, and the fast-growing pair west of Edmonton on Highway 16A, each with its own permit office or process.
- St. Albert T8N 1960s homes on replacement furnaces, with chimney and orphaned water heater questions
- Morinville T8R Side-wall PVC vents buried by drifting snow on exposed sides of the house
- Spruce Grove T7X Builder-grade furnaces from early 2000s phases reaching 15 to 20 years
- Stony Plain T7Z High-efficiency furnaces shut down by frosted or drifted side-wall vents
~30 min typical drive · 4 communities
Sherwood Park, Leduc & Beaumont
Sherwood Park, Fort Saskatchewan, Beaumont and Leduc. Strathcona County's large urban community with 1950s to 2020s homes, the city on the North Saskatchewan next to the Industrial Heartland, and the growing subdivisions of Beaumont and Leduc south of Edmonton.
- Sherwood Park T8A Older bungalows with chimney venting and orphaned hot water tanks at replacement
- Fort Saskatchewan T8L Side-wall PVC vents blocked by snow drifts and exhaust frost
- Beaumont T4X PVC intake and exhaust frosting or drifting shut
- Leduc T9E High-efficiency furnaces shut down by frosted or drifted PVC vents
What Changes by Area
The House Decides the Furnace Problem
The community changes the housing era, the venting and the drive. The diagnosis, the written price and the honest repair-or-replace advice stay the same everywhere.
1900s–1940s character homes
Garneau, Old Strathcona, Westmount, Glenora, parts of Oliver
Converted from coal or gravity heat, ductwork added later and undersized, tight basements, one chimney shared by the furnace and the hot water tank.
1950s–1960s bungalows
Jasper Place, Bonnie Doon, Beverly, older St. Albert and Sherwood Park
On their second or third furnace. The next replacement raises the orphaned hot water tank question, and basement renovations often boxed in ducts and blocked returns.
1970s–1980s suburbs
Mill Woods, Castle Downs, Clareview, Callingwood, Riverbend
Second- or third-generation furnaces on original ductwork, many homes on their second hot water tank, and AC added later on undersized returns.
1990s–2020s subdivisions
Terwillegar, Windermere, Heritage Valley, Summerside, Griesbach, Spruce Grove, Beaumont, Leduc
High-efficiency furnaces with side-wall PVC vents that drift over and frost up, HRVs, power-vented or tankless water heaters, and builder-grade furnaces reaching 15 to 20 years.
Not on the List?
Tell Us Your Community
The 28 communities above are the ones with their own page, not the edge of the map. Send the request with your community or postal code. If it is outside our range, we tell you straight away.
- No-heat calls get priority
- Arrival window confirmed when we reply
- Price in writing before any work starts
Confirm Coverage and Book
Tell us what the furnace is doing. We reply with an arrival window and a price range, and the price is confirmed in writing before any work starts.
All Services
Furnace, AC, Heat Pump and Hot Water Work in Every Area
The same ten services in every community we cover, from no-heat repairs and tune-ups to furnace replacement, air conditioning and hot water tanks.
