
Emergency Furnace Repair
No heat in a cold snap: frosted vents, frozen condensate lines, failed igniters and inducer motors, fixed or made safe first.

Sherwood Park, Leduc & Beaumont · T4X
No-heat repairs, tune-ups, furnace replacement, air conditioning, heat pumps and hot water tanks for Beaumont homes, with the diagnosis explained and the price in writing before work starts.
Heating in Beaumont
Beaumont is a city south-east of Edmonton with French-Canadian roots and fast-growing 2000s to 2020s subdivisions. Homes are high-efficiency, tightly built and fitted with HRVs.

Working the area
Service calls around Leduc and Southeast Edmonton, and the streets between.
Beaumont's growth has come mostly from the 2000s on, so its housing is young and fairly uniform: a high-efficiency furnace, an HRV, PVC vents on the side wall and, in many cases, a bonus room over the garage. The winter failures are the ones that come with that design. A furnace locked out on its pressure switch because frost from the exhaust has crept over the intake. A condensate line frozen where it passes a cold wall. An HRV core iced up during the coldest week.
Most of these are fixed in one visit; a vent clear or termination kit fix is typically $150 to $600 in Edmonton, confirmed in writing before any work starts. The bigger conversation in Beaumont is heat pumps. Owners want to know whether a cold-climate heat pump can carry the house, and the honest answer is that it can carry a lot of the year, with falling output as the temperature drops, so most installs keep the gas furnace as backup for the deep cold. That hybrid setup also gives the bonus room and upstairs bedrooms air conditioning in summer. Beaumont is its own city, and the gas and electrical permits go through Beaumont or its accredited agency.
What We See Most
The patterns behind most Beaumont service calls, given the age of the homes and how they were built.
PVC intake and exhaust frosting or drifting shut
Frozen condensate lines and traps in cold snaps
Bonus rooms over garages that are cold in winter and hot in summer
Heat pump installation for cooling and hybrid heating
Something else in Beaumont?
A furnace that short-cycles, a noisy blower, an HRV that froze, a hot water tank that runs out fast: tell us what it is doing and when it started.
Send a requestServices in Beaumont

No heat in a cold snap: frosted vents, frozen condensate lines, failed igniters and inducer motors, fixed or made safe first.

Cold-climate heat pumps paired with your gas furnace, honest about what they do at -25°C and what they cost.

Central air sized for the house on your existing furnace and ducts, with the condenser placed right and permitted.

Swapping a tired furnace for a 95–98% unit, including the chimney and hot water tank venting questions older homes raise.

A real tune-up before winter: combustion test, flame sensor, igniter, pressure switch, condensate trap, filter and vents.

Hot water tank repair and replacement: gas, power-vent and tankless, with sediment, venting and the gas permit handled.
Before We Arrive
Some no-heat calls end at step one. The rest go faster when we know what the furnace did before it stopped.
Thermostat set to heat and above room temperature, batteries, the furnace switch and breaker, and a filter that isn't grey and bowed.
From outside, find the two white PVC pipes. Snow drifted over them or a ring of frost inside is the most common cold-snap shutdown.
Count the flashes on the board through the sight glass on the blower door. The chart is inside the door. It saves diagnostic time.
Community, furnace age if you know it, what it's doing and the blink code. We reply with an arrival window for Beaumont.
Tell us what the furnace is doing. We reply with an arrival window and a price range, and the price is confirmed in writing before any work starts.
Nearby Communities
East and south of the city: Strathcona County, the river city by the Heartland, and two fast-growing cities by the airport.
All Service AreasPermits & Safety
Beaumont Questions
Straight answers on timing, local failure patterns, cost and permits.
All QuestionsNo-heat calls get priority, and typical drive time to Beaumont is around 30 minutes from wherever the technician is working. We confirm the arrival window when we reply to your request rather than promise a time we can't keep. While you wait, check the thermostat, the furnace switch and breaker, the filter, and the two PVC vent pipes outside for snow or frost.
The pattern we see most in Beaumont is PVC intake and exhaust frosting or drifting shut, followed by frozen condensate lines and traps in cold snaps. Beaumont is a city south-east of Edmonton with French-Canadian roots and fast-growing 2000s to 2020s subdivisions. Homes are high-efficiency, tightly built and fitted with HRVs. Cold snaps stress every furnace in the region, so frosted vents, frozen condensate lines and worn igniters show up in every community.
Typical Edmonton ranges apply in Beaumont: a diagnostic visit runs $129 to $199 in regular hours and $199 to $349 after hours. Common parts include an igniter at $225 to $450, a flame sensor at $129 to $299 and an inducer motor at $650 to $1,400. A new high-efficiency furnace, installed, typically runs $4,800 to $7,500 for a single-stage unit. Your price is confirmed in writing before any work starts.
Yes. Replacing a gas furnace or a gas hot water tank needs a gas permit through the City of Beaumont or its accredited agency, and an inspection after the work. The contractor pulls the permit; gas work in Alberta is done by a certified gasfitter. Ask to see the permit number on your quote or invoice.
No-heat calls get priority. We reply with the arrival window for Beaumont and a price range, and nothing is done without your OK in writing.